PLASMA CUTTER, CUTSKILL 35, 10 AMP, 12MM MILD STEEL

Cigweld has now officially changed plasma cutting forever, with the launch of the new range of CutSkill Manual Plasma Cutting machines. Over two years in development, the new CutSkill 35 machine from Cigweld features a user interface that not only incorporates the latest in colour LCD technology, but also simplifies the entire cutting set up process.

With a single control knob, the operator can select each function necessary to suit their desired needs. Decide if you want your torch set to manual or latch mode, whether you’re cutting flat plate or grid plate, adjust your current and you’re ready to cut! All of these actions are clearly displayed on the massive 2.8″ colour LCD display.

Includes:

• 1 x CutSkill 35 Plasma Power Source
• 1 x CutSkill 60A Plasma Torch
• 1 x Work Cable and Clamp
• 1 x Wrench for Air Filter
• 1 x 1/4″ Nitto Air Line Connector
• 1 x Shoulder Strap

Features:

• 2.8″ LCD screen displays all cutting setting, input voltage and input air pressure
• Single Control Knob adjusts all cutting settings
• Removable air filter with purging valve: Moisture in your air compressor can reduce the lifespan of the Plasma Torch consumables. The CutSkill inbuilt air filter removes this problem – The air filter can be purged at any time by using the purging valve and is also removable for cleaning. It is housed in a concave inset in order to prevent damage
• Internal regulator: The regulator is internal and air through the torch is managed automatically by the plasma unit. This removes the need to adjust air pressure for individual cutting requirements
• Torch: Both Plasma CutSkill machines come complete with a detachable 60 amp torch with 5 meter lead designed specifically for the CutSkill plasma cutting range. The torch includes a safety latch in order to prevent risk of accidental arc
• Inline air filter: Designed to prevent all moisture, plus oil and dirt down to 0.85 microns from passing through your air line to the plasma unit. This offers extra protection in addition to the inbuilt air filter located in the plasma unit itself
• Fully Compliant to AS 60974.1-2006. Enclosure rated to IP23S
• Recommended air compressor required: 800kPa,12 CFM

Specifications:

• Input power: 240V, 1Ph, PFC, 10A
• Duty cycle: 35% @ 35A
• Input air required: 730kPa, 110LPM
• Generator required: 8kVA
• Max cut:
• Mild steel clean cut: 12mm
• Mild steel severance: 16mm
• Stainless clean cut: 10mm
• Aluminium clean cut: 8mm

Warranty:

• 3 Year Limited Warranty on Power Source covered by Cigweld Australia