MULTITOOL BELT AND DISC GRINDING ATTACHMENT, 1220X100MM, 178MM DISC

Features:

The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.

• EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
• VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
• ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
• QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
• 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.

Specifications:

• 48″ x 4″ wide (1220 x 100mm) belt.
• 7″ (178mm) diameter disc.
• 3 1/2″ (89mm) diameter rubber contact wheel.
• 5 1/2″ (140mm) diameter drive wheel.
• The 484 suits most popular 8″ bench grinders with a screw mounted wheel guard and a minimum of 3/4 HP.
• Suits shaft sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″.
• Fitting Kit supplied.
• NOTE: This is an attachment only.