FLAP WHEEL, 50 X 30MM, 6MM SHANK, 60 GRIT

Advantages:

• High flexibility
• High stock removal due to the aggressive coated abrasive
• Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times
• Due to the flat cast core construction, the face of the mounted flap wheels can be used to work very close to edges and in corners

Recommendations for use:

• Mounted flap wheels achieve their best performance at a recommended cutting speed of 15Ð20 m/s. This provides an ideal compromise between stock removal, surface quality, thermal load on the workpiece and tool wear.
• Flexible shafts, electric and air-powered straight grinders can be used as tool drives
• Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Safety notes:

• For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times
• Safety is only guaranteed if:
  • The clamping depth is at least 15 mm
  • The specified maximum rotational speed for unsupported shank lengths is not exceeded