UNIMIG RAZOR CUT 80 PLASMA CUTTER

Includes:

• 30mm clean cuts and 35mm cutting capacity
• The CNC connection means you can use this machine for every kind of plasma application
• Cut anything with the perforated cut mode
• Get a 25mm clean cut and a severance cut of 35mm on mild steel
• Get a 22mm clean cut and a severance cut of 30mm on aluminium
• Get a 22mm clean cut and a severance cut of 30mm on stainless steel
• Solid Cutting Mode: Cut through solid metal plate on any material
• With the perforated cutting mode, you can cut materials like grating or mesh without interruption
• Switch to gouging consumables to efficiently remove defects, welds, or pre-existing metal from your workpiece
• HD Backlit Interface: This next-generation interface panel is bright and easy to read in any environment
• Inverter Technology: Not every inverter is made equal. With UNIMIG’s ever-evolving, state-of-the-art IGBT Inverter technology, you get better performance, better efficiency, and better reliability
• CNC Connectivity: Not just a handheld plasma cutter, the CNC connection lets you plug in a CNC torch and run it on a CNC table, so you can choose how you use it
• Pilot Arc Start: Start your arc on any surface: painted, greasy, or rusted, or don’t start on the surface at all. A pilot arc start will ignite the arc even from a short distance away, giving you better control and longer-lasting consumables
• Smart Fan: Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimises the number of contaminants being pulled through the machine
• Rated IP23S, so it’s protected from touch by fingers and objects greater than 12mm, and water spray less than 60° from vertical while still

Specifications:

• Primary Input Voltage: 415V Three-Phase
• Supply Plug: Unplugged (20A Recommended)
• Ieff (A): 13.0
• Imax (A): 19.0
• Air Flow Draw: 120-150 L/min
• Air Flow Pressure:
• 58-73 psi
• 4-5 bar
• 0.4-0.5 MPa
• Open Circuit Voltage: 325 OCV
• Protection Class: IP23S
• Insulation Class: H
• Minimum Generator: 18.0 kVA
• Dinse Connector: 35/50
• Standard: AS 60974.1
• Plasma Specifications:
• Plasma Cut Current Range: 20-80A
• Plasma Cut Duty Cycle @ 40°C
  • 40% @ 80A
  • 60% @ 66A
  • 100% @ 51A
• Mild Steel Cut Thickness: 25mm
• Mild Steel Severance Thickness: 35mm
• Stainless Steel Cut Thickness: 22mm
• Stainless Steel Severance Thickness: 30mm
• Aluminium Cut Thickness: 22mm
• Aluminium Severance Thickness: 30mm
• Dimensions (L x W x H): 626mm x 230mm x 416mm
• Weight: 22.00kg

Warranty

• 5 Years Warranty Covered by UNIMIG